MIK-RD702 Guided wave radar level meter
-
Specification
| Product | Guided wave radar level meter |
| Model | SUP-RD702 |
| Measure range | 0-20 meters |
| Application | Acid, alkali, other corrosive media |
| Process Connection | Flange |
| Medium Temperature | -40℃~130℃ |
| Process Pressure | -0.1 ~ 0.3MPa |
| Accuracy | ±10mm |
| Protection Grade | IP67 |
| Frequency Range | 500MHz-1.8GHz |
| Signal Output | 4-20mA (Two-wire/Four) |
| RS485/Modbus | |
| Power supply | DC(6~24V)/ Four-wire DC 24V / Two-wire |
-
Introduction
SUP-RD702 guide wave radar level meter can launch high frequency micro-waves which transmits along with probe.
-
Product Size
-
Installation guide
H—-Measuring range
L—-Empty tank height
B—-Blind area
E—-Minimum distance from probe to tank wall >50mm
Note:
The top Blind area refers to the minimum distance between the highest material surface of the material and the measurement reference point.
Blind area at the bottom refers to a distance that cannot be accurately measured near the bottom of the cable.
The effective measurement distance is between the top Blind area and the bottom Blind area.
Write your message here and send it to us
